Nylon CF15 Carbon

$60.00 USD
Diameter
In stock
Description

Discover all Nylons:

This filament is made of polyamide 12 reinforced with 15 % of milled carbon fibers.
It is characterized by high strength, high thermal and chemical resistance, great processing stability, and rheological properties.

The material is suitable for the production of continually stressed parts, such as bearings, cogwheels, reinforcement parts, etc.

Features:

  • Mechanical properties retained also under low temperatures
  • Wear resistance
  • Suitable for printing continually stressed parts
  • Stiffness & strength
  • Creep resistance (resistance against deformation under long-term load)
  • Great temperature resistance
  • High hardness
  • Nice & smooth surface
  • Low density
  • Chemical resistance against a wide range of substances
  • Improved tensile strength
  • Low thermal expansion
  • Safe to use in electrical and electronic equipment

     

    Working temperature: 235–260 °C
    Heated bed: 80–110 °C
    Diameter: 1.75 mm and 2.85 mm
    Diameter tolerance: +/- 0.10 mm 
    Weight:
    600 g of filament (+ 230 g spool)
    The length of the filament:
    243 m (1.75 mm, 600 g)
    94 m (2.85 mm, 600 g)
    RAL | Pantone | HEX:
    N/A | N/A | N/A


     

    Comparison of our Nylon family:

      Nylon AF80 Aramid Nylon CF15 Carbon Nylon FX256
    Tensile strength 50.4 MPa 54.5 MPa 45 MPa
    Elongation at break 5.8 % 103 % 50 %
    Impact resistance 53.2 kJ/m² (unnotched) ★ 86.2 kJ/m² (unnotched) ★ 7 kJ/m² (notched) ★★★
    Ease of printing ★★★ ★★
    Wear resistance ★★★ ★★★ ★★
    Creep resistance ★★★ ★★★
    Heat resistance from -40 °C up to 140 °C from -40 °C up to 140 °C from -40 °C up to 140 °C
    Heat resistance at high load ★★★★ ★★★

     

    The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

     

      

     

    You may also like:

     




    Everything else you need

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    T
    The_D
    I can recommend!

    CF15 Carbon
    - cube dimensions (20x20x5)
    - case is designed for electronics tested in a heated chamber (70°C) + 100°C on PCB