ABS Extrafill "Natural"

$18.00 USD
Low stock - 8 in stock, ready to ship

ABS Extrafill is a material that exhibits a high quality of printing even in tricky details with excellent lamination.

It's excellent for the production of the first functional samples before serial production. For functional prototyping, manufacturing tools and aids, but also for the production of goods for everyday use.


  • Smooth finish
  • High-temperature resistance
  • Tensile strength
  • Impact resistance
  • Chemical resistance against acids, alcohols, alkalis, oils, greases, ozone, and water
  • Low density
  • Resilience
  • Recyclable
  • Low moisture absorption
  • Environmentally friendly material
  • Safe to use in electrical and electronic equipment


Working temperature: 220–240 °C
Heated bed: 80–105 °C
Diameter: 1.75 mm and 2.85 mm
Diameter tolerance: +/- 0.05 mm 
750 g of filament (+ 230 g spool)
The length of the filament:
305 m (1.75 mm, 750 g)
114 m (2.85 mm, 750 g)
RAL | Pantone | HEX:
5013 | N/A | N/A


Comparison of our styrenic polymers:

  PC/ABS  ASA Extrafill  ABS Extrafill  HIPS Extrafill 
Weather resistance yellowing  UV stability  yellowing  yellowing 
Tensile strength 42 MPa  40 MPa  32 MPa  26 MPa 
Elongation at break 7 %  35 %  20 %  40 %
Hardness ★★★★  ★★  ★★★  ★★ 
Impact resistance
★★★  ★★★  ★★  ★★ 
Heat resistance
113 °C  94 °C  96 °C  88.5 °C 


The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.



You may also like:

    Everything else you need

    Customer Reviews

    Based on 3 reviews
    Tomas Dutton
    Great material

    It fulfills expectations


    No problems with fillament.

    Thomas Merz
    Very good and pure ABS

    It‘s not easy to find a pure ABS. This one is pure and you can glue and soften it with Aceton. I printed 10kg without any issues. I made glue and slurry with it - no problem at all (it took around 8h to completely dissolve). Just one thing: Spool fits into AMS of Bambulab P1S, but fresh spools gets stuck because winded filament hit the feeder…so I had to put it on a spool of Bambulab.