Carbon-fibers-reinforced CPE HG100 filament was developed for its pressure resistance, hardness, and surface effect. The contained fibers ensure functionality, great printability, dimensional stability, and layer adhesion. The printed objects have a nice smooth surface.

This material is optimal for applications with long-term loads. It has higher wear resistance, heat distortion temperature, hardness, and chemical resistance in comparison with CPE HG100.

Features:

High-technical durable long-life material
Good interlayer adhesion
Creep resistance (resistance against deformation under long-term load)
Matte finish
Wear resistance
Temperature resistance up to 100 °C
High hardness
Chemical resistance against acids, alkalis, alcohols
Easy printing
Low warping
Recyclable
25% Bio-based
BPA-free & styrene-free
Safe to use in electrical and electronic equipment

Working temperature:	255–275 °C
Heated bed:	70–85 °C
Diameter:	1.75 mm
Diameter tolerance:	+/- 0.10 mm
The length of the filament:	15 m
Available Spool variants:	CPE CF112 Carbon

Abrasive – wear-resistant nozzles are recommended!
3D Printing Guide
For a good adhesion use PVA glue or 3DLac. Due to a great adhesion to other materials, it can damage your bed without a separation layer of adhesive
Moisture sensitive – keep in a protective resealable sachet
Drying filaments before processing
Spools Dimension
Data Sheets

Comparison of our copolyester filaments:

	CPE CF112 Carbon	CPE HG100	PETG	PETG filaments*
Impact resistance	106 kJ/m2 (unnotched)	no break (notched)	85 J/m (notched)	98–126 J/m (notched)
Tensile strength	52 MPa	48 MPa	50 MPa	26–45 MPa
Elongation at break	8 %	150 %	120 %	58–110 %
Hardness	94 R-Scale	115 R-Scale	105 R-Scale	108 R-Scale
Flexural strength	/	71 MPa	71 MPa	54–74 MPa
Flexural modulus	/	1860 MPa	2150 MPa	1600–2100 MPa
Wear resistance	★★★★	★★	★	★
Creep resistance	★★★★	★★	★	★
Heat resistance (HDT)	up to 100 °C	80 °C	70 °C	70 °C
Chemical resistance to acids, bases, hydrocarbons	good	good	poor	poor

*publicly accessible information from other producers

The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

Currency

CPE CF112 Carbon

Currency